Tissue Eng Part A:羟基磷灰石/胶原蛋白3D打印支架及其对hBMSCs的成骨作用
2019-01-26 MedSci MedSci原创
3D打印提供了一种使用定制的仿生组织支架修复骨缺损的新方法。为了使骨替代物最接近天然骨结构和组成,将两种不同类型的羟基磷灰石,纳米羟基磷灰石(nHA)和脱蛋白牛骨(DBB)分散到胶原(CoL)中以制备用于3D打印的生物浆料。在此过程中,多孔结构采用3D打印技术制造。评估材料的物理和化学性质,包括生物相容性和对人骨髓来源的间充质干细胞(hBMSC)的成骨分化的影响。 XPS,XRD,FTIR和材料的
3D打印提供了一种使用定制的仿生组织支架修复骨缺损的新方法。为了使骨替代物最接近天然骨结构和组成,将两种不同类型的羟基磷灰石,纳米羟基磷灰石(nHA)和脱蛋白牛骨(DBB)分散到胶原(CoL)中以制备用于3D打印的生物浆料。在此过程中,多孔结构采用3D打印技术制造。评估材料的物理和化学性质,包括生物相容性和对人骨髓来源的间充质干细胞(hBMSC)的成骨分化的影响。
XPS,XRD,FTIR和材料的机械分析表明,两种HA的元素一致,但化学键和晶相不同。 SEM结果显示HA晶体和支架的不同表面形态,这将是影响支架内部多孔结构的主要因素。两种复合支架在细胞增殖方面没有差异。FITC- phalloidine / vinculin / DAPI染色表明hBMSCs可以很好地粘附到3D打印表面上。碱性磷酸酶(ALP)染色反映了在成骨诱导培养基(OM)组中表达的ALP,但在增殖培养基(PM)组上没有表达。RT-PCR结果显示,与PM组相比,OM组7天后成骨相关基因RUNX2,SOX9,OCN和CoL1A1的表达水平显着升高(P <0.01)。 SOX9,OCN和CoL1A1在nHA / CoL支架中的表达高于CoL支架中的表达(p <0.05)。DBB/ CoL支架中OCN和CoLIA1的表达高于CoL支架中的表达(p <0.05)。
总之,由nHA / CoL或DBB / CoL组成的3D生物打印支架的物理化学和生物学特性非常适合于支架成为多孔定制骨替代物,3D打印支架将成为未来临床应用的潜在候选者。
原始出处:
Li Q, Lei X, et al., Hydroxyapatite /Collagen 3D printed Scaffolds and their Osteogenic Effects on hBMSCs. Tissue Eng Part A. 2019 Jan 16. doi: 10.1089/ten.TEA.2018.0201.
本网站所有内容来源注明为“梅斯医学”或“MedSci原创”的文字、图片和音视频资料,版权均属于梅斯医学所有。非经授权,任何媒体、网站或个人不得转载,授权转载时须注明来源为“梅斯医学”。其它来源的文章系转载文章,或“梅斯号”自媒体发布的文章,仅系出于传递更多信息之目的,本站仅负责审核内容合规,其内容不代表本站立场,本站不负责内容的准确性和版权。如果存在侵权、或不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
在此留言
#Eng#
0
#BMSC#
59
#Tissue#
55
#3D#
45
#成骨#
48
#ART#
39
#BMS#
48
#MSC#
58
#胶原蛋白#
69
#羟基磷灰石#
57