期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (9)
Nano-bainitic steels have attracted great attention for good wear resistance. In this research, a medium-carbon low-alloyed steel was austempered at a......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (8)
TiB2 has excellent performances in terms of wear resistance and corrosion resistance, mechanical strength, high elastic modulus and high compressive s......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (5)
The hot deformation behavior of pre-forged AZ80 magnesium alloy is investigated by the isothermal compression tests at temperatures of 523-683 K and s......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (7)
Microstructure, texture characteristics, mechanical and bio-corrosion properties of the Mg-5Zn-xSr alloys (x = 0, 0.2, 0.6, 1.0) prepared by high stra......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (5)
In this study, the Ti-6Al-4V alloy hollow spheres were prepared by powder metallurgy method under different sintering temperatures (1200 degrees C, 12......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (5)
Laser hardening is an important branch of laser surface hardening technology, which is widely used in metallurgy, transportation, machinery manufactur......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (5)
In this paper, to research the dynamic recrystallization (DRX) behavior of a high-strength steel (34CrNiMo6), hot compression tests were carried on Gl......
期刊： METALS AND MATERIALS INTERNATIONAL, 2021; 27 (5)
The creep behavior and damage mechanisms of 718 alloys were investigated at 800-900 degrees C in air. The fracture morphology and microstructure evolu......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
In this paper, Cr12 steel was taken as the research object, and laser micro melting model was established in comsol software based on physical equatio......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
In present work, a novel SiCf reinforced (Al3Ti + Al3Ni)-based metallic-intermetallic laminate (Ti-(Al3Ti + Al3Ni)/SiCf-MIL) composite without centerl......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
The high-temperature deformation characteristics of an ultrahigh strength steel is studied by hot compression tests under the deformation temperatures......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
Conventional friction stir processing (FSP) and ultrasonic-assisted friction stir processing (Ua-FSP) were applied to modify the microstructure and en......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
The effects of process parameters and aging treatment on the microstructure and mechanical properties of selective laser melting (SLM) fabricated high......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
Minor Zr and V were added individually and jointly to Al-12.5Si-1Cu alloy to develop heat-resistant aluminum alloys. The as-cast microstructure, room ......
期刊： METALS AND MATERIALS INTERNATIONAL, ; ()
Due to the high exothermic characteristic of NiAl during the reaction synthesis process from Ni-Al elemental powders, the NiAl intermetallic melts fre......
